- Commercial Buildings
- Corporate Campuses
- Manufacturing Facilities
- Aircraft, Busses, Trains, Vessels
- Community Centers
- Transit Centers
- Shopping Malls
- Populated Locations
Fast-Acting Surface Cleanser with 10% Isopropanol (IPA) and a High-pH Cleaner
A general purpose, micro-cleaning solution for large surface areas requiring frequent cleaning. IPA Mico-Clean 10 general purpose, micro-cleaning solution containing 10% isopropanol (IPA) and a High-pH cleaner.
|IPA Micro-Clean 10 LIQUID||1 GAL (3.785 LITER) JUG|
|5 GAL (18.925 LITER) PAIL|
|55 GAL (208 LITER) DRUM|
Properties @ 77°F (25°C)
|Relative Density (S.G.)||0.96 – 0.98|
|Freeze Temperature, °F (°C)||-4 (-25)|
|Initial Boiling Point, °F (°C)||178.00 (81.1)|
|Toxicity||Yes, If consumed|
|Flashpoint, °F (°C), ASTM D93-11||96 (35.6)|
|Fumes During Treatment||Light Alcohol|
|Drying Time||1 – 3 minutes|
Gloves and eye protection recommended.
IPA Micro-Clean 10 LIQUID can be applied as follows:
Coverage: Approximately 300-400 ft2 / gallon (7.34 – 9.79 m2 / liter).
Cleaning: Clean all equipment, tools with fresh clean water immediately after use.
Two years shelf life when stored unopened, in a cool, dry, well-ventilated space. Always agitate, shake or stir before use. Do not allow product to freeze. Freezing may eliminate or reduce effectiveness.
As with all chemical products, adequate precautions and care must be taken during use and storage. Avoid direct contact with foodstuff, eyes and mouth. Do not contact with open cuts or wounds. Immune compromised or highly sensitive personnel should not use this product.
Any direct contact with mouth and eyes should be washed thoroughly with clean running water.
Certain antidepressants may increase the effects of IPA on sensitive users, even in small amounts. Should headache, dizziness, flushing, depression, nausea, vomiting, anesthesia, hypothermia, low blood pressure, shock, respiratory depression, or coma occur, move to fresh air and consider calling 911.
LIMITED WARRANTY: International Chem-Crete Inc. warrants that, at the time and place we make shipment, our materials will be of good quality and will conform to our published specifications in force on the date of acceptance of the order.
DISCLAIMER: The information contained herein is included for illustrative purposes only and to the best of our knowledge, is accurate and reliable. International Chem-Crete Inc. is not under any circumstances liable in connection with the use of information. As International Chem-Crete Inc. has no control over the use to which others may put its’ products, it is recommended that the products be tested to determine the suitability for specific applications and/or our information is valid in particular circumstances. End-user shall determine the suitability of the product for specific application and assume all responsibility in connection therewith. AM170820-4