USES
As trouble-free chemical treatment for concrete, mortar, bricks, and stone masonry, CHEM-HARD 25 is an ideal hardening, densifying, and dustproofing agent for:
- Industrial plants; chemical processing, sewage treatment, water treatment, refineries, food processing, etc.
- Civic centers & Sport arenas
- Parking decks
- Hospitals, airports, and museums
TECHNICAL
Property |
Value @ 25°C (77°C) |
Specific Gravity |
1.225 |
Freeze Temperature, ºF (ºC) |
32 (0) |
Freeze Harm |
None |
Boling Point, ºF (ºC) |
230 (110) |
Solvent Clean up |
Water |
Odor |
None |
Color |
Clear |
Toxicity |
None |
Flammability |
None |
Fumes During Treatment |
None |
Environmental Hazards |
None |
Applicable Standards:
Taber Abraser CS-17 wheel, 1000 grams at 1000 revolution.
APPLICATION
Preparation: Surface to be treated must be clean, dry and free of all dirt, dust, sealers, wax, oils, curing compounds or any other type of foreign matter. Concrete must be cured for 28 days.
Application:
- Apply CCC625 uniformly on the entire concrete surface to be hardened. Apply at the rate of 300 square feet per gallon.
- Allow surface to dry before use.
Cleaning: clean all tools and sprayers with Water.
STORAGE
Store all containers between 40ºF (5ºC) and 95ºF (35ºC). Shelf life is 24 months in original unopened container. Do not allow product to Freeze.
SAFETY
Do not allow material to come into contact with glass, aluminum or glazed tile systems. Keep Out of Reach of Children.
WARRANTY
LIMITED WARRANTY: International Chem-Crete Inc. warrants that, at the time and place we make shipment, our materials will be of good quality and will conform to our published specifications in force on the date of acceptance of the order.
DISCLAIMER: The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable. International Chem-Crete Inc. is not under any circumstances liable to connection with the use of information. As International Chem-Crete Inc. has no control over the use to which others may put its products, it is recommended that the products be tested to determine the suitability for specific applications and/or our information is valid in particular circumstances. Responsibility remains with the architect or engineer, contractor and owner of the design, application and proper installation of each product. Specifier and user shall determine the suitability of the product for specific application and assume all responsibility in connection therewith. AM26319.