Surface Preparation: Make sure all surface waters have evaporated prior to application.
Application: Apply CHEM-SEAL 30 using a spray, brush, roller, etc. using a consistent and complete application method to the concrete surfaces to be cured and sealed. Apply Chem-Seal 30 after a minimum of 7 days curing if a high gloss is desired.
Cleaning: tools, equipment, spray unit, etc. can be cleaned immediately using a minerals spirit or any suitable solvent.
The product can be stored for minimum of twelve months at temperature from 40ºF(5ºC) to 40ºF (25ºC) in the unopened original packing.
Keep product away from eyes and skin contact. Good ventilation should be provided particularly in closed work areas.
LIMITED WARRANTY: International CHEM-CRETE Inc. warrants that, at the time and place we make shipment, our materials will be of good quality and will conform to our published specifications in force on the date of acceptance of the order.
DISCLAIMER: The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable. International CHEM-CRETE Inc. is not under any circumstances liable to connection with the use of information. As International CHEM-CRETE Inc. has no control over the use to which others may put its products, it is recommended that the products be tested to determine the suitability for specific applications and/or our information is valid in particular circumstances. Responsibility remains with the architect or engineer, contractor and owner of the design, application and proper installation of each product. Specifier and user shall determine the suitability of the product for specific application and assume all responsibility in connection therewith. AM02519.