CHEM-SIL 85W

Water-based Curing and Hardening Compound for New Concrete Surfaces, White Pigmentd

CHEM-SIL 85W is a sodium silicate based curing and hardening compound for new or old concrete surfaces. CHEM-SIL 85W will assist in the production of bi-calcium and tri-calcium ele­ments to increase the hardness of the concrete assembly.

Downloads

Technical Data Sheet

USES

Chem-Sil 85 W can be applied on new concrete to increase the surface hardness and to minimize shrinkage cracks. It acts on dust proof compound

ADVANTAGES

  • Water based
  • No VOC
  • Non-Toxic
  • Easily applies by spraying

PACKAGING

 

Product Packaging
CHEM-SIL 85W 5 GAL (18.925 LITER) PAIL
55 GAL (208 LITER) DRUM

 

TECHNICAL

 

Property Value @ 25°C (77°F)
Specific Gravity 1.2
Freeze Temperature, ºF (ºC) 20 (-7)
Freeze Harm None
Boiling Point, ºF (ºC) 214 (102)
Solvent Clean up Water
Color White
Toxicity None
Flammability None
Fumes During Treatment None
Environmental Hazards None

 

APPLICATION

Thoroughly agitate materials immediately prior to use. Decant materials into a hand ­pump spray can, liquid tank for power spray equipment or install drum pump directly to material container. Spray CHEM-SIL 85W in a consis­tent pattern at a rate of 200 square feet per gallon over the entire surface area of the concrete assembly in the shortest amount of time possible.

 

Cleaning: clean all tools and sprayers with water.

STORAGE

Store all containers between 40ºF (5ºC) and 95ºF (35ºC). Shelf life is 24 months in original unopened container. Do not allow product to Freeze.

SAFETY

Do not allow material to come into contact with glass, aluminum or glazed tile systems. Keep Out of Reach of Children.

 

WARRANTY

LIMITED WARRANTY:   International Chem-Crete Inc. warrants that, at the time and place we make shipment, our materials will be of good quality and will conform to our published specifications in force on the date of acceptance of the order.

 

DISCLAIMER:   The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable. International Chem-Crete Inc. is not under any circumstances liable to connection with the use of information. As International Chem-Crete Inc. has no control over the use to which others may put its products, it is recommended that the products be tested to determine the suitability for specific applications and/or our information is valid in particular circumstances. Responsibility remains with the architect or engineer, contractor and owner of the design, application and proper installation of each product. Specifier and user shall determine the suitability of the product for specific application and assume all responsibility in connection therewith. AM26319.