CHEM-CRETE UNIFOUR 30D

Solvent-based All Resin Dyed Concrete Curing Compound

CHEM-CRETE UNIFOUR 30D is a 100% resin-based transparent curing compound of a solution of resinous solids in petroleum solvents with white heat reflective pigments. CHEM-CRETE UNIFOUR 30D will form a film on a concrete assembly which will eventually dissipate after the critical intermediate curing stage is completed. Will allow subsequent applications of materials such as: paint, epoxy, mastic, etc. Product is used primarily on engineering projects such as highways, airport runways, and other concrete assemblies exposed to direct sunlight.

Downloads

Technical Data Sheet

USES

CHEM-CRETE UNIFOUR 30D can be used for curing fresh concrete to prevent losses of hydration moisture and to prevent formation of cracks.

PACKAGING

 

Product Packaging
CHEM-CRETE UNIFOUR 30D 5 Gallon (19.93 Liter) Pail
55 Gallon (208.19 Liter) Drum

 

APPLICATION

Preparation: as soon as the concrete assembly has reached the set stage and the finishing is completed, make sure the surfaces of the concrete assembly are free from ponded water and proceed to application.

 

Application: Thoroughly agitate materials immediately prior to use. Decant materials into a hand­pump spray can, liquid tank for power spray equipment or install drum pump directly to material container. Spray CHEM-CRETE UNIFOUR 30D in a consistent pattern at a rate of 200 ft2/Gallon (4.9 m2/Liter) over the entire surface area of the concrete assembly in the shortest amount of time possible.

 

Cleaning: clean all tools and sprayers with Mineral Spirit.

SAFETY

Do not allow material to come into contact with eyes, hands, glass, aluminum or glazed tile systems.

STORAGE

Store all containers between 40ºF and 95ºF (5ºC and 35ºC). Shelf life 1 year in original unopened container.

WARRANTY

LIMITED WARRANTY:   International Chem-Crete Inc. warrants that, at the time and place we make shipment, our materials will be of good quality and will conform to our published specifications in force on the date of acceptance of the order.

 

DISCLAIMER:   The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable. International Chem-Crete Inc. is not under any circumstances liable to connection with the use of information. As International Chem-Crete Inc. has no control over the use to which others may put its products, it is recommended that the products be tested to determine the suitability for specific applications and/or our information is valid in particular circumstances. Responsibility remains with the architect or engineer, contractor and owner of the design, application and proper installation of each product. Specifier and user shall determine the suitability of the product for specific application and assume all responsibility in connection therewith. AM22419.